| Citation: |
GUO Genxi, ZHUANG Baolu, WANG Liangyun, HU Yu, HUANG Xiaohua, TAO Qiyou. Design of automatic control system with remote pneumatic conveying feeding system based on PLC[J]. South China Fisheries Science, 2008, 4(6): 7-16.
|
In order to improve feeding automatization and industrialization level of feeding and meet the needs for fish feeding during modern aquaculture production, remote pneumatic conveying automatic feeding system was developed, and the automatic control for the feeding system integrated with programmable logic controller (PLC) and sensor was successfully designed. PLC was used as control core in the system, which was integrated kinds of techniques including programming and sensors, etc. The primary structure, and working principle of the feeding system, selection of controlling system hardware and measures for programming methods were also introduced. Feeding operation with accurate quantification, automatic control and humanization operationman-machine friendliness was realized and monitored through the system software programmed with the ladder diagram language, which run in the environment of GX-DEVELOPER-8.34. Test results on feeding system showed that it can handle up to 300 m feeding pipe at 1 586 kg · h-1 when discharge pressure was 49.0 kPa, which proved that the feeding system could can improve feeding efficiency and meet quality effectively.
| [1] |
蔡红斌. 电器与PLC控制技术[M]. 北京: 清华大学出版社, 2007: 119-138.
|
| [2] |
QIESTAD V, PEDERSEN T, FOLKVORD A, et al. Automatic feeding and harvesting of juvenile Atlantic cod (Gadus movhua L. ) in a pond[J]. Modeling, Identification and Contral, 1987, 8(1): 39-46. doi: 10.4173/mic.1987.1.5
|
| [3] |
PAPANDROULAKIS N, DIMITRIS P, PASCAL D. An automated feeding system for intensive hatcheries [J]. Aquac Eng, 2002, 26(1): 13-26. doi: 10.1016/S0144-8609(01)00091-7
|
| [4] |
宋协法, 路士森. 深水网箱投饵机设计与试验研究[J]. 中国海洋大学学报: 自然科学版, 2006, 36(3): 405-409. doi: 10.3969/j.issn.1672-5174.2006.03.013
|
| [5] |
郭根喜. 我国深水网箱养殖产业化发展存在的问题与基本对策[J]. 南方水产, 2006, 2(1): 66-70. doi: 10.3969/j.issn.2095-0780.2006.01.014
|
| [6] |
郭根喜, 陶启友. 我国深水网箱养殖技术及发展展望(下)[J]. 科学养鱼, 2004(9): 10-11. https://kns.cnki.net/kcms2/article/abstract?v=-xbefZa1CdvR7ftu0puu4L_doG--4t1RA06QY0XyAg-A8dLspY72I9xG6UhS3BJ9d0TIFys05LZDIQf8C5I-6JDi_aTjE7k8uJfTOn68x1EHTMXT85b5ShqTWRfA6IE2exkePED0J5eZfrBRBbMFTjYarkstXOZwVNe6EVaXdIPAQvv0DE7xU2mE9g1Of6Mg&uniplatform=NZKPT&language=CHS
|
| [7] |
吴子岳, 龚莉, 刘兆明. 深水网箱及其配套设备的应用与研究进展[J]. 水产科技情报, 2006, 33(4): 169-171. doi: 10.3969/j.issn.1001-1994.2006.04.014
|
| [8] |
朱健康, 丁兰. 深水区大型抗风浪网箱配套设施系统[J]. 福建水产, 2005(4): 70-73. doi: 10.3969/j.issn.1006-5601.2005.04.017
|
| [9] |
林健康. TEJ500水产养殖自动投饵机[J]. 农机化研究, 2003(1): 165-168. doi: 10.3969/j.issn.1003-188X.2003.01.067
|
| [10] |
施槐奎, 周丽英, 金仰贤, 等. 投饵机在水产养殖中的推广及应用[J]. 浙江农机电, 2006(2): 22-23. https://d.wanfangdata.com.cn/periodical/Ch9QZXJpb2RpY2FsQ0hJTmV3UzIwMjQxMTA1MTcxMzA0Eg96am5jamQyMDA2MDIwMTgaCGRtb2Z5dnN0
|
| [11] |
李湘钒. 压气式气力输送系统与吸气式气力输送系统的应用分析[J]. 苏州大学学报: 工科版, 2004, 24(1): 60-64. doi: 10.3969/j.issn.1673-047X.2004.01.015
|
| [12] |
滕立国, 梁荣新. 基于PLC的自动定位系统[J]. 现代电子技术, 2007(16): 63-64. doi: 10.3969/j.issn.1004-373X.2007.16.021
|
| [13] |
崔小乐, 周卓岑. 可编程控制器的梯形图语言与语句表语言的互换算法[J]. 微电子学与计算机, 2000(1): 26-30. doi: 10.19304/j.cnki.issn1000-7180.2000.01.007
|
Supported by: Beijing Renhe Information Technology Co., Ltd.
粤公网安备 44010502001741号
DownLoad: