南海北部龙头鱼刺网网目选择性研究

Mesh size selectivity of Harpodon nehereus gillnet in northern South China Sea

  • 摘要: 为了获取南海北部龙头鱼(Harpodon nehereus)刺网的最小网目尺寸,2015年1月进行了36 mm、38 mm和40 mm 3种网目尺寸的网目选择性研究,利用Normal、Lognormal和Gamma选择性模型曲线进行拟合,采用极大似然估计法估算选择性模型参数。结果表明,南海区龙头鱼刺网最适网目选择性曲线为Gamma曲线;根据鱼体长度确定最小网目尺寸比根据鱼体最大体周更加合适;参照东海区龙头鱼开捕规格的研究结果,计算得出南海区龙头鱼刺网最小网目尺寸为38.71 mm。为了实现龙头鱼刺网的合理使用,建议严格控制最小网目尺寸的实施, 合理选择作业海域和时间。

     

    Abstract: To obtain the minimum mesh size of Harpodon nehereus gillnet in northern South China Sea, we tested three different meshes of 36 mm, 38 mm and 40 mm during January, 2015. Normal, Lognormal and Gamma models were used to fit the H.nehereus data, and model parameters were estimated by maximum likelihood method. The results indicated that H.nehereus gillnet had good selectivity, and Gamma curve provided the best fit for gillnet selectivity. The minimum mesh size of H.nehereus gillnet calculated by the body length was more appropriate than that by the maximum body girth. According to the research on the first capture size of H.nehereus in the East China Sea, the minimum mesh size of H.nehereus gillnet was calculated to be 38.71 mm in the South China Sea. In order to achieve rational exploitation of H.nehereus gillnet, the minimum mesh size is suggested to be under control strictly, and the fishing ground and fishing time must be chosen reasonably.

     

/

返回文章
返回